|
Full
Inspections
A thorough evaluation of the major subsystems
including: structure, exterior, roof and
gutters, plumbing, electrical, interior, heating
and cooling, insulation and ventilation, and all
major appliances.
Highland Home Inspections, Inc -- Working for
You. A computer generated report is
provided by e-mail/fax.
|
Price Range |
|
Inspection Fee |
|
450K or
Below |
0.1%
with $350 minimum for Detached
Single Family Homes:
$325 minimum for Town Homes
$275 minimum for Condos |
|
451K to
600K |
$450* |
|
601K to
750K |
$500* |
|
751K to
900k |
$575* |
|
900k to
1.5M |
$650* |
|
1.5M to
2M |
$750* min or (Hourly) |
|
2M to
2.5M |
$1200* min or (Hourly) |
|
|
*Subtract $50 for Town Homes
*Subtract $100 for Condos |
Note: Our
inspections are conducted during normal working
hours, but arranging for off-hour inspections is
often possible. There is a 10% additional fee
for Saturday and late inspections (4
pm or
later).
Our service
area is between Washington, Baltimore, Frederick
and Annapolis. We will do inspections outside
of these areas for an additional Travel Fee.
Other
Inspections
Fee
Follow-up (under
an hour)
$125
A re-inspection of specific defects that were to
be corrected prior to closing.
Partial
$125/hour ($150 minimum)
The evaluation of a single component, system or
problem (e.g. water in the basement, roof,
furnace, etc.)
Homeowner's Maintenance Inspection
Contact
Us For Pricing!
New Construction
A 3-phase
inspection to include any or all of the
following: pre-backfill inspection of the
foundation, a pre-drywall inspection of the
completed framing, electrical, plumbing, heating
and cooling, and a pre-settlement walk-through.
|
Pre-backfill |
$150 |
|
Pre-drywall (Single Family) |
$295
($325 if greater than 3,000 sq. ft.)
($375 if greater than 4,000 sq. ft.) |
|
Pre-drywall (Town Home) |
$275 |
|
Pre-settlement |
Same as
full inspection
(less 25% if pre-drywall
conducted) |
An evaluation
of the exterior, roof, attic area, attic fans,
gutters, furnace/heat pump, water heater,
plumbing leaks, moisture in the basement,
chimneys, decks, smoke detectors, carbon
monoxide detectors, etc. A computer generated
report is provided on-site or by e-mail/fax.
Environmental Inspections
Fee
| |
|
|
Radon testing
with home inspection |
$125 |
|
Radon testing
without home inspection |
$150 |
|
Mold testing
with home inspection |
$150 plus
samples |
|
Mold testing
without home inspection |
$175 plus
samples |
|
Mold samples |
$50 4-5 day
turnaround |
| |
$75 2-3 day
turnaround |
|
